{"id":7765308932278,"title":"Cusco - 16mm Rear Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-965-311-b16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:26+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","JP1","rear","steel","toyota","ws124"],"price":23200,"price_min":23200,"price_max":23200,"available":true,"price_varies":false,"compare_at_price":28900,"compare_at_price_min":28900,"compare_at_price_max":28900,"compare_at_price_varies":false,"variants":[{"id":42666274128054,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 B16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 16mm Rear Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":23200,"weight":12000,"compare_at_price":28900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075","options":["Title"],"media":[{"alt":"Cusco - 16mm Rear Anti Roll Bar - Toyota 86 ZN6 - 965 311 B16","id":27149735985334,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308833974,"title":"Cusco - 16mm Front Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-16mm-front-anti-roll-bar-toyota-86-zn6-965-311-a16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:23+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","front","JP1","steel","toyota","ws124"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":26900,"compare_at_price_min":26900,"compare_at_price_max":26900,"compare_at_price_varies":false,"variants":[{"id":42666273996982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 A16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 16mm Front Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":21600,"weight":12000,"compare_at_price":26900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","options":["Title"],"media":[{"alt":"Cusco - 16mm Front Anti Roll Bar - Toyota 86 ZN6 - 965 311 A16","id":27149735887030,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308801206,"title":"Cusco - 20mm Front Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-20mm-front-anti-roll-bar-toyota-86-zn6-965-311-a20","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A20\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?20mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:55+08:00","created_at":"2024-02-05T15:05:20+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","front","JP1","steel","toyota","ws124"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":26900,"compare_at_price_min":26900,"compare_at_price_max":26900,"compare_at_price_varies":false,"variants":[{"id":42666273964214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 A20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 20mm Front Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":21600,"weight":12000,"compare_at_price":26900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","options":["Title"],"media":[{"alt":"Cusco - 20mm Front Anti Roll Bar - Toyota 86 ZN6 - 965 311 A20","id":27149735854262,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A20\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?20mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308768438,"title":"Cusco - 26mm Rear Anti Roll Bar - Toyota C-HR ZYX10","handle":"cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-1a7-311-b26","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 B26\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?26, 125% Compare To Standard *Standard ?24.5mm. Bushings And Bracket Included!\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:52+08:00","created_at":"2024-02-05T15:05:17+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2016","2017","2018","anti-roll-bars","bars-and-braces","c-hr-zyx10-2016-2018-na-2zr-fe-i4","cusco-japan","cusco-japan30","JP1","rear","steel","toyota","ws124"],"price":26400,"price_min":26400,"price_max":26400,"available":true,"price_varies":false,"compare_at_price":32900,"compare_at_price_min":32900,"compare_at_price_max":32900,"compare_at_price_varies":false,"variants":[{"id":42666273931446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A7 311 B26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 26mm Rear Anti Roll Bar - Toyota C-HR ZYX10","public_title":null,"options":["Default Title"],"price":26400,"weight":12000,"compare_at_price":32900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076","options":["Title"],"media":[{"alt":"Cusco - 26mm Rear Anti Roll Bar - Toyota C-HR ZYX10 - 1A7 311 B26","id":27149735690422,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 B26\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?26, 125% Compare To Standard *Standard ?24.5mm. Bushings And Bracket Included!\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e"}

{"id":7765308735670,"title":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR ZYX10","handle":"cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-1a7-311-a28","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:51+08:00","created_at":"2024-02-05T15:05:14+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2016","2017","2018","anti-roll-bars","bars-and-braces","c-hr-zyx10-2016-2018-na-2zr-fe-i4","cusco-japan","cusco-japan30","front","JP1","steel","toyota","ws124"],"price":27200,"price_min":27200,"price_max":27200,"available":true,"price_varies":false,"compare_at_price":33900,"compare_at_price_min":33900,"compare_at_price_max":33900,"compare_at_price_varies":false,"variants":[{"id":42666273898678,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A7 311 A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR ZYX10","public_title":null,"options":["Default Title"],"price":27200,"weight":12000,"compare_at_price":33900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077","options":["Title"],"media":[{"alt":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR ZYX10 - 1A7 311 A28","id":27149735657654,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e"}

{"id":7765308702902,"title":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR NGX50","handle":"cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-1a7-311-a28","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | NGX50 | 2016-2018 | TC | 8NR-FTS | I4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:11+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2016","2017","2018","anti-roll-bars","bars-and-braces","c-hr-ngx50-2016-2018-tc-8nr-fts-i4","cusco-japan","cusco-japan30","front","JP1","steel","toyota","ws124"],"price":27200,"price_min":27200,"price_max":27200,"available":true,"price_varies":false,"compare_at_price":33900,"compare_at_price_min":33900,"compare_at_price_max":33900,"compare_at_price_varies":false,"variants":[{"id":42666273865910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A7 311 A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR NGX50","public_title":null,"options":["Default Title"],"price":27200,"weight":12000,"compare_at_price":33900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077","options":["Title"],"media":[{"alt":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR NGX50 - 1A7 311 A28","id":27149735624886,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | NGX50 | 2016-2018 | TC | 8NR-FTS | I4\u003c!--split--\u003e"}

{"id":7758312112310,"title":"Blitz - ZZ-R repair part No. 19 Dust Boots ZZ-R diameter 20mm, 1 piece","handle":"blitz-zz-r-repair-part-no-19-dust-boots-zz-r-diameter-20mm-1-piece-92405-024","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003e92405-024\u003cbr\u003e\u003cbr\u003eNo. 19 Dust Boots ZZ-R diameter 20mm, 1 piece","published_at":"2024-01-26T13:51:38+08:00","created_at":"2024-01-26T13:50:37+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","JP1","toyota","ws113","yaris-cross-mxpj10-2020-2025-h-m15a-fxe-i4"],"price":1880,"price_min":1880,"price_max":1880,"available":true,"price_varies":false,"compare_at_price":2000,"compare_at_price_min":2000,"compare_at_price_max":2000,"compare_at_price_varies":false,"variants":[{"id":42640152199350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92405-024","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - ZZ-R repair part No. 19 Dust Boots ZZ-R diameter 20mm, 1 piece","public_title":null,"options":["Default Title"],"price":1880,"weight":300,"compare_at_price":2000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-19-dust-boots-zz-r-diameter-20mm-1-piece-rzcrew.jpg?v=1710314193"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-19-dust-boots-zz-r-diameter-20mm-1-piece-rzcrew.jpg?v=1710314193","options":["Title"],"media":[{"alt":"Blitz - ZZ-R repair part No. 19 Dust Boots ZZ-R diameter 20mm, 1 piece - 92405-024 - Rzcrewgarage","id":27107135357110,"position":1,"preview_image":{"aspect_ratio":1.0,"height":900,"width":900,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-19-dust-boots-zz-r-diameter-20mm-1-piece-rzcrew.jpg?v=1710314193"},"aspect_ratio":1.0,"height":900,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-19-dust-boots-zz-r-diameter-20mm-1-piece-rzcrew.jpg?v=1710314193","width":900}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003e92405-024\u003cbr\u003e\u003cbr\u003eNo. 19 Dust Boots ZZ-R diameter 20mm, 1 piece"}

{"id":7758312046774,"title":"Blitz - ZZ-R repair part No.20 Bump Rubber ZZ-R diameter 22mm, 1 piece","handle":"blitz-zz-r-repair-part-no-20-bump-rubber-zz-r-diameter-22mm-1-piece-92405-012","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003e92405-012\u003cbr\u003e\u003cbr\u003eNo.20 Bump Rubber ZZ-R diameter 22mm, 1 piece","published_at":"2024-01-26T13:51:31+08:00","created_at":"2024-01-26T13:50:34+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","JP1","toyota","ws113","yaris-cross-mxpj10-2020-2025-h-m15a-fxe-i4"],"price":1690,"price_min":1690,"price_max":1690,"available":true,"price_varies":false,"compare_at_price":1800,"compare_at_price_min":1800,"compare_at_price_max":1800,"compare_at_price_varies":false,"variants":[{"id":42640152101046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92405-012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - ZZ-R repair part No.20 Bump Rubber ZZ-R diameter 22mm, 1 piece","public_title":null,"options":["Default Title"],"price":1690,"weight":300,"compare_at_price":1800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-20-bump-rubber-zz-r-diameter-22mm-1-piece-rzcrew.jpg?v=1710314193"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-20-bump-rubber-zz-r-diameter-22mm-1-piece-rzcrew.jpg?v=1710314193","options":["Title"],"media":[{"alt":"Blitz - ZZ-R repair part No.20 Bump Rubber ZZ-R diameter 22mm, 1 piece - 92405-012 - Rzcrewgarage","id":27107135094966,"position":1,"preview_image":{"aspect_ratio":1.0,"height":900,"width":900,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-20-bump-rubber-zz-r-diameter-22mm-1-piece-rzcrew.jpg?v=1710314193"},"aspect_ratio":1.0,"height":900,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-zz-r-repair-part-no-20-bump-rubber-zz-r-diameter-22mm-1-piece-rzcrew.jpg?v=1710314193","width":900}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003e92405-012\u003cbr\u003e\u003cbr\u003eNo.20 Bump Rubber ZZ-R diameter 22mm, 1 piece"}

{"id":7743833243830,"title":"Cusco Japan - Sport R Coilover Kit - Toyota Yaris GR GXPA16","handle":"cusco-japan-sport-r-coilover-kit-toyota-yaris-gr-gxpa16-1c7-64r-cp","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64R CP\u003cbr\u003eType: Sport R Ref 1C7 64R CP\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -20\u003cbr\u003eSpring Rates (Kg): 11 or (9\/10\/12\/14\/16)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 14 or (10\/11\/12\/16\/18\/20)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT R was developed for all-out track cars participating in full-scale racing, time attack competitions. \u003cbr\u003eThese coilovers are optimised for track compound tyres.\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-01-03T12:42:16+08:00","created_at":"2024-01-03T12:40:52+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","coilover-kits","coilovers-and-springs","cusco-japan","dampening-and-height-adjustable","JP1","toyota","ws119","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":249328,"price_min":249328,"price_max":249328,"available":true,"price_varies":false,"compare_at_price":275500,"compare_at_price_min":275500,"compare_at_price_max":275500,"compare_at_price_varies":false,"variants":[{"id":42581096661174,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C7 64R CP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport R Coilover Kit - Toyota Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":249328,"weight":30000,"compare_at_price":275500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314293"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314293","options":["Title"],"media":[{"alt":"Cusco Japan - Sport R Coilover Kit - Toyota Yaris GR GXPA16 - 1C7 64R CP - Rzcrewgarage","id":27003959967926,"position":1,"preview_image":{"aspect_ratio":1.667,"height":300,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314293"},"aspect_ratio":1.667,"height":300,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314293","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64R CP\u003cbr\u003eType: Sport R Ref 1C7 64R CP\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -20\u003cbr\u003eSpring Rates (Kg): 11 or (9\/10\/12\/14\/16)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 14 or (10\/11\/12\/16\/18\/20)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT R was developed for all-out track cars participating in full-scale racing, time attack competitions. \u003cbr\u003eThese coilovers are optimised for track compound tyres.\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7743833211062,"title":"Cusco Japan - Sport S Coilover Kit - Toyota Yaris GR GXPA16","handle":"cusco-japan-sport-s-coilover-kit-toyota-yaris-gr-gxpa16-1c7-64s-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64S CN\u003cbr\u003eType: Sport S Ref 1C7 64S CN\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -20\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 7 or (6\/8\/9\/10\/11)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side.\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-01-03T12:42:16+08:00","created_at":"2024-01-03T12:40:49+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","coilover-kits","coilovers-and-springs","cusco-japan","dampening-and-height-adjustable","JP1","toyota","ws119","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":230775,"price_min":230775,"price_max":230775,"available":true,"price_varies":false,"compare_at_price":255000,"compare_at_price_min":255000,"compare_at_price_max":255000,"compare_at_price_varies":false,"variants":[{"id":42581096628406,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C7 64S CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport S Coilover Kit - Toyota Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":230775,"weight":30000,"compare_at_price":255000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301","options":["Title"],"media":[{"alt":"Cusco Japan - Sport S Coilover Kit - Toyota Yaris GR GXPA16 - 1C7 64S CN - Rzcrewgarage","id":27003959935158,"position":1,"preview_image":{"aspect_ratio":1.344,"height":372,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301"},"aspect_ratio":1.344,"height":372,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64S CN\u003cbr\u003eType: Sport S Ref 1C7 64S CN\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -20\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 7 or (6\/8\/9\/10\/11)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side.\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7743833178294,"title":"Cusco Japan - Sport TN-R Coilover Kit - Toyota Yaris GR GXPA16","handle":"cusco-japan-sport-tn-r-coilover-kit-toyota-yaris-gr-gxpa16-1c7-64v-cp","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64V CP\u003cbr\u003eType: Sport TN.R Ref 1C7 64V CP\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -20 \u003cbr\u003eSpring Rates (Kg): 11 or (9\/10\/12\/14\/16)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 10 or (7\/8\/9\/11\/12\/13\/14\/15)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT TN-R was developed for all-out track cars participating in full-scale racing, time attack competitions. \u003cbr\u003eThese coilovers are optimised for track compound tyres.\u003cbr\u003e \u003cbr\u003eThese coilovers are equipped with Cusco's TNS \"Twin Needle System\", which allows independent adjustment of compression and rebound\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003eTNS 24-Step Adjustment Range:\u003cbr\u003eThanks to the TNS \"Twin Needle System\", it is possible to adjust both the Compression and Rebound independently by 24 steps each, delivering the most precise settings possible.\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-01-03T12:42:16+08:00","created_at":"2024-01-03T12:40:47+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","coilover-kits","coilovers-and-springs","cusco-japan","dampening-and-height-adjustable","JP1","toyota","ws119","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":305166,"price_min":305166,"price_max":305166,"available":true,"price_varies":false,"compare_at_price":337200,"compare_at_price_min":337200,"compare_at_price_max":337200,"compare_at_price_varies":false,"variants":[{"id":42581096595638,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C7 64V CP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport TN-R Coilover Kit - Toyota Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":305166,"weight":30000,"compare_at_price":337200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301","options":["Title"],"media":[{"alt":"Cusco Japan - Sport TN-R Coilover Kit - Toyota Yaris GR GXPA16 - 1C7 64V CP - Rzcrewgarage","id":27003959804086,"position":1,"preview_image":{"aspect_ratio":1.667,"height":300,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301"},"aspect_ratio":1.667,"height":300,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-r-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64V CP\u003cbr\u003eType: Sport TN.R Ref 1C7 64V CP\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -20 \u003cbr\u003eSpring Rates (Kg): 11 or (9\/10\/12\/14\/16)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 10 or (7\/8\/9\/11\/12\/13\/14\/15)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT TN-R was developed for all-out track cars participating in full-scale racing, time attack competitions. \u003cbr\u003eThese coilovers are optimised for track compound tyres.\u003cbr\u003e \u003cbr\u003eThese coilovers are equipped with Cusco's TNS \"Twin Needle System\", which allows independent adjustment of compression and rebound\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003eTNS 24-Step Adjustment Range:\u003cbr\u003eThanks to the TNS \"Twin Needle System\", it is possible to adjust both the Compression and Rebound independently by 24 steps each, delivering the most precise settings possible.\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7743833145526,"title":"Cusco Japan - Sport TN-S Coilover Kit - Toyota Yaris GR GXPA16","handle":"cusco-japan-sport-tn-s-coilover-kit-toyota-yaris-gr-gxpa16-1c7-64w-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64W CN\u003cbr\u003eType: Sport TN.S Ref 1C7 64W CN \u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -25 ? -50 to -5\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 7 or (6\/8\/9\/10\/11)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT TN-S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side. \u003cbr\u003eThese coilovers are equipped with Cusco's TNS \"Twin Needle System\", which allows independent adjustment of compression and rebound\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003eTNS 24-Step Adjustment Range:\u003cbr\u003eThanks to the TNS \"Twin Needle System\", it is possible to adjust both the Compression and Rebound independently by 24 steps each, delivering the most precise settings possible.\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-01-03T12:42:16+08:00","created_at":"2024-01-03T12:40:44+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","coilover-kits","coilovers-and-springs","cusco-japan","dampening-and-height-adjustable","JP1","toyota","ws119","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":286614,"price_min":286614,"price_max":286614,"available":true,"price_varies":false,"compare_at_price":316700,"compare_at_price_min":316700,"compare_at_price_max":316700,"compare_at_price_varies":false,"variants":[{"id":42581096530102,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C7 64W CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport TN-S Coilover Kit - Toyota Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":286614,"weight":30000,"compare_at_price":316700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301","options":["Title"],"media":[{"alt":"Cusco Japan - Sport TN-S Coilover Kit - Toyota Yaris GR GXPA16 - 1C7 64W CN - Rzcrewgarage","id":27003959738550,"position":1,"preview_image":{"aspect_ratio":1.667,"height":300,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301"},"aspect_ratio":1.667,"height":300,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-sport-tn-s-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314301","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1C7 64W CN\u003cbr\u003eType: Sport TN.S Ref 1C7 64W CN \u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -25 ? -50 to -5\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 7 or (6\/8\/9\/10\/11)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The SPORT TN-S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side. \u003cbr\u003eThese coilovers are equipped with Cusco's TNS \"Twin Needle System\", which allows independent adjustment of compression and rebound\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003eTNS 24-Step Adjustment Range:\u003cbr\u003eThanks to the TNS \"Twin Needle System\", it is possible to adjust both the Compression and Rebound independently by 24 steps each, delivering the most precise settings possible.\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7712204587190,"title":"Racing Gear - Type HS Monotube Coilover Kit - Toyota Yaris GR GXPA16","handle":"racing-gear-type-hs-monotube-coilover-kit-toyota-yaris-gr-gxpa16-hs-t87s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Racing Gear\u003cbr\u003ePart Number: HS-T87S\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Pillow Ball\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Rubber Bushing\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eFront: Pannel cutting necessary\u003cbr\u003eRear: Pannel cutting necessary\u003cbr\u003e\u003cbr\u003eRacing Gear Type HS coilover is a good mix for the daily drive and Sunday fun at the track. Similar to Tein Flex Z, these \"made in Japan\" Coilover are the perfect Adjustable full length suspension for the bucks. It features:\u003cbr\u003e\u003cbr\u003e\nFull Length Adjustment body: Allows adjustment of vehicle height without sacrificing stroke. You can also adjust the preload.\nThe necessary bump stroke amount is secured even when the vehicle height is lowered.\u003cbr\u003eFor those whom like playing with knobs, the damping force is adjustable by 15 steps for a more versatile experience.\u003cbr\u003e\nUpper mount included: The front strut features a camber adjustable pillow ball upper mount (when available) providing a perfect and direct handling feel.\nFor rear shocks and other vehicle types, a reinforced rubber bush type mount is used ensuring quietness and comfort similar to stock suspension. \u003cbr\u003eDust boots and bump rubber are included to protect the piston rod and cylinder from flying stones and dust, improving their durability. The inverted damper has a bump rubber inserted inside the cylinder.\u003cbr\u003eThe spring can be changed according to the desired specification without additional charge when ordering. Feel free to leave us a note during order.\u003cbr\u003e\n? Civic (FD2) · Fit (GD1.3 · GE 6.8) · Copen (L 880 K) springs are progressive and can not be changed.\u003cbr\u003eNylon sheet\nStandard equipped with nylon sheets at the top and bottom of the spring. By improving the sliding property of \"twist\" generated at the time of spring expansion and contraction, it reduces friction and suppresses abnormal noise.\u003cbr\u003eSuper strength steel shell case \/ flange\u003cbr\u003e\nRG adopts steel material to handle high stress and provide a longer lifespan. The strut type knuckle attachment plate has ribs for enhanced strength. The surface is plated to achieve high corrosion resistance in combination with aesthetics.\u003cbr\u003eMaintenance\u003cbr\u003eNew cartridge (only shock absorber part) could be ordered to ensure a low downtime replacement or maintenance if necessary.\u003cbr\u003eWarranty. 1 year from purchase and less than 20,000 km on leaking unit, pillow balls damage or noise are not included in the warranty coverage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-11-08T13:34:30+08:00","created_at":"2023-11-08T13:12:18+08:00","vendor":"Racing Gear","type":"Coilovers and Springs","tags":["2020","2021","2022","2023","2024","2025","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","jp1","racing gear265.8275456125","racing-gear","toyota","ws127","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":108740,"price_min":108740,"price_max":108740,"available":true,"price_varies":false,"compare_at_price":125700,"compare_at_price_min":125700,"compare_at_price_max":125700,"compare_at_price_varies":false,"variants":[{"id":42481663082678,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HS-T87S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Racing Gear - Type HS Monotube Coilover Kit - Toyota Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":108740,"weight":28000,"compare_at_price":125700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314657"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314657","options":["Title"],"media":[{"alt":"Racing Gear - Type HS Monotube Coilover Kit - Toyota Yaris GR GXPA16 - HS-T87S - RZCrewGarage","id":26802982256822,"position":1,"preview_image":{"aspect_ratio":1.181,"height":271,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314657"},"aspect_ratio":1.181,"height":271,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314657","width":320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Racing Gear\u003cbr\u003ePart Number: HS-T87S\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Pillow Ball\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Rubber Bushing\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eFront: Pannel cutting necessary\u003cbr\u003eRear: Pannel cutting necessary\u003cbr\u003e\u003cbr\u003eRacing Gear Type HS coilover is a good mix for the daily drive and Sunday fun at the track. Similar to Tein Flex Z, these \"made in Japan\" Coilover are the perfect Adjustable full length suspension for the bucks. It features:\u003cbr\u003e\u003cbr\u003e\nFull Length Adjustment body: Allows adjustment of vehicle height without sacrificing stroke. You can also adjust the preload.\nThe necessary bump stroke amount is secured even when the vehicle height is lowered.\u003cbr\u003eFor those whom like playing with knobs, the damping force is adjustable by 15 steps for a more versatile experience.\u003cbr\u003e\nUpper mount included: The front strut features a camber adjustable pillow ball upper mount (when available) providing a perfect and direct handling feel.\nFor rear shocks and other vehicle types, a reinforced rubber bush type mount is used ensuring quietness and comfort similar to stock suspension. \u003cbr\u003eDust boots and bump rubber are included to protect the piston rod and cylinder from flying stones and dust, improving their durability. The inverted damper has a bump rubber inserted inside the cylinder.\u003cbr\u003eThe spring can be changed according to the desired specification without additional charge when ordering. Feel free to leave us a note during order.\u003cbr\u003e\n? Civic (FD2) · Fit (GD1.3 · GE 6.8) · Copen (L 880 K) springs are progressive and can not be changed.\u003cbr\u003eNylon sheet\nStandard equipped with nylon sheets at the top and bottom of the spring. By improving the sliding property of \"twist\" generated at the time of spring expansion and contraction, it reduces friction and suppresses abnormal noise.\u003cbr\u003eSuper strength steel shell case \/ flange\u003cbr\u003e\nRG adopts steel material to handle high stress and provide a longer lifespan. The strut type knuckle attachment plate has ribs for enhanced strength. The surface is plated to achieve high corrosion resistance in combination with aesthetics.\u003cbr\u003eMaintenance\u003cbr\u003eNew cartridge (only shock absorber part) could be ordered to ensure a low downtime replacement or maintenance if necessary.\u003cbr\u003eWarranty. 1 year from purchase and less than 20,000 km on leaking unit, pillow balls damage or noise are not included in the warranty coverage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7712204521654,"title":"Racing Gear - Type HS Monotube Coilover Kit - Toyota 86 ZN8","handle":"racing-gear-type-hs-monotube-coilover-kit-toyota-86-zn8-hs-t86s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Racing Gear\u003cbr\u003ePart Number: HS-T86S\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Pillow Ball\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Rubber Bushing\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eFront: Pannel cutting necessary\u003cbr\u003eRear: Pannel cutting necessary\u003cbr\u003e\u003cbr\u003eRacing Gear Type HS coilover is a good mix for the daily drive and Sunday fun at the track. Similar to Tein Flex Z, these \"made in Japan\" Coilover are the perfect Adjustable full length suspension for the bucks. It features:\u003cbr\u003e\u003cbr\u003e\nFull Length Adjustment body: Allows adjustment of vehicle height without sacrificing stroke. You can also adjust the preload.\nThe necessary bump stroke amount is secured even when the vehicle height is lowered.\u003cbr\u003eFor those whom like playing with knobs, the damping force is adjustable by 15 steps for a more versatile experience.\u003cbr\u003e\nUpper mount included: The front strut features a camber adjustable pillow ball upper mount (when available) providing a perfect and direct handling feel.\nFor rear shocks and other vehicle types, a reinforced rubber bush type mount is used ensuring quietness and comfort similar to stock suspension. \u003cbr\u003eDust boots and bump rubber are included to protect the piston rod and cylinder from flying stones and dust, improving their durability. The inverted damper has a bump rubber inserted inside the cylinder.\u003cbr\u003eThe spring can be changed according to the desired specification without additional charge when ordering. Feel free to leave us a note during order.\u003cbr\u003e\n? Civic (FD2) · Fit (GD1.3 · GE 6.8) · Copen (L 880 K) springs are progressive and can not be changed.\u003cbr\u003eNylon sheet\nStandard equipped with nylon sheets at the top and bottom of the spring. By improving the sliding property of \"twist\" generated at the time of spring expansion and contraction, it reduces friction and suppresses abnormal noise.\u003cbr\u003eSuper strength steel shell case \/ flange\u003cbr\u003e\nRG adopts steel material to handle high stress and provide a longer lifespan. The strut type knuckle attachment plate has ribs for enhanced strength. The surface is plated to achieve high corrosion resistance in combination with aesthetics.\u003cbr\u003eMaintenance\u003cbr\u003eNew cartridge (only shock absorber part) could be ordered to ensure a low downtime replacement or maintenance if necessary.\u003cbr\u003eWarranty. 1 year from purchase and less than 20,000 km on leaking unit, pillow balls damage or noise are not included in the warranty coverage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN8 | 2021-2023 | NA | FA24 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-11-08T13:34:20+08:00","created_at":"2023-11-08T13:12:15+08:00","vendor":"Racing Gear","type":"Coilovers and Springs","tags":["2021","2022","2023","86-zn8-2021-2023-na-fa24-h4","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","jp1","racing gear265.8275456125","racing-gear","toyota","ws127"],"price":108740,"price_min":108740,"price_max":108740,"available":true,"price_varies":false,"compare_at_price":125700,"compare_at_price_min":125700,"compare_at_price_max":125700,"compare_at_price_varies":false,"variants":[{"id":42481663017142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HS-T86S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Racing Gear - Type HS Monotube Coilover Kit - Toyota 86 ZN8","public_title":null,"options":["Default Title"],"price":108740,"weight":28000,"compare_at_price":125700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-86-zn8-rzcrew.jpg?v=1710314657"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-86-zn8-rzcrew.jpg?v=1710314657","options":["Title"],"media":[{"alt":"Racing Gear - Type HS Monotube Coilover Kit - Toyota 86 ZN8 - HS-T86S - RZCrewGarage","id":26802982158518,"position":1,"preview_image":{"aspect_ratio":1.181,"height":271,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-86-zn8-rzcrew.jpg?v=1710314657"},"aspect_ratio":1.181,"height":271,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/racing-gear-type-hs-monotube-coilover-kit-toyota-86-zn8-rzcrew.jpg?v=1710314657","width":320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Racing Gear\u003cbr\u003ePart Number: HS-T86S\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Pillow Ball\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eHeight Adjustable: Yes\u003cbr\u003eDampening Adjustable: Yes\u003cbr\u003eTop Mount: Rubber Bushing\u003cbr\u003eSpring Rate: 6Kg\u003cbr\u003e\u003cbr\u003eFront: Pannel cutting necessary\u003cbr\u003eRear: Pannel cutting necessary\u003cbr\u003e\u003cbr\u003eRacing Gear Type HS coilover is a good mix for the daily drive and Sunday fun at the track. Similar to Tein Flex Z, these \"made in Japan\" Coilover are the perfect Adjustable full length suspension for the bucks. It features:\u003cbr\u003e\u003cbr\u003e\nFull Length Adjustment body: Allows adjustment of vehicle height without sacrificing stroke. You can also adjust the preload.\nThe necessary bump stroke amount is secured even when the vehicle height is lowered.\u003cbr\u003eFor those whom like playing with knobs, the damping force is adjustable by 15 steps for a more versatile experience.\u003cbr\u003e\nUpper mount included: The front strut features a camber adjustable pillow ball upper mount (when available) providing a perfect and direct handling feel.\nFor rear shocks and other vehicle types, a reinforced rubber bush type mount is used ensuring quietness and comfort similar to stock suspension. \u003cbr\u003eDust boots and bump rubber are included to protect the piston rod and cylinder from flying stones and dust, improving their durability. The inverted damper has a bump rubber inserted inside the cylinder.\u003cbr\u003eThe spring can be changed according to the desired specification without additional charge when ordering. Feel free to leave us a note during order.\u003cbr\u003e\n? Civic (FD2) · Fit (GD1.3 · GE 6.8) · Copen (L 880 K) springs are progressive and can not be changed.\u003cbr\u003eNylon sheet\nStandard equipped with nylon sheets at the top and bottom of the spring. By improving the sliding property of \"twist\" generated at the time of spring expansion and contraction, it reduces friction and suppresses abnormal noise.\u003cbr\u003eSuper strength steel shell case \/ flange\u003cbr\u003e\nRG adopts steel material to handle high stress and provide a longer lifespan. The strut type knuckle attachment plate has ribs for enhanced strength. The surface is plated to achieve high corrosion resistance in combination with aesthetics.\u003cbr\u003eMaintenance\u003cbr\u003eNew cartridge (only shock absorber part) could be ordered to ensure a low downtime replacement or maintenance if necessary.\u003cbr\u003eWarranty. 1 year from purchase and less than 20,000 km on leaking unit, pillow balls damage or noise are not included in the warranty coverage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN8 | 2021-2023 | NA | FA24 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7680278495414,"title":"Cusco Japan - 25mm Front Anti Roll Bar - Toyota Yaris GR GXPA16","handle":"cusco-japan-25mm-front-anti-roll-bar-toyota-yaris-gr-gxpa16-1c6-311-a25","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1C6-311-A25\u003cbr\u003eType: Front 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - 25mm Front Anti Roll Bar - Toyota Yaris GR GXPA16 - 1C6-311-A25.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-10-10T09:52:16+08:00","created_at":"2023-10-10T07:56:55+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2020","2021","2022","2023","2024","2025","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan14","front","GXPA16","JP1","steel","toyota","ws124","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":27200,"price_min":27200,"price_max":27200,"available":true,"price_varies":false,"compare_at_price":33900,"compare_at_price_min":33900,"compare_at_price_max":33900,"compare_at_price_varies":false,"variants":[{"id":42406397935798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C6-311-A25","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - 25mm Front Anti Roll Bar - Toyota Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":27200,"weight":9000,"compare_at_price":33900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-25mm-front-anti-roll-bar-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314696"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-25mm-front-anti-roll-bar-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314696","options":["Title"],"media":[{"alt":"Cusco Japan - 25mm Front Anti Roll Bar - Toyota Yaris GR GXPA16 - 1C6-311-A25","id":27149736706230,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-25mm-front-anti-roll-bar-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314696"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-25mm-front-anti-roll-bar-toyota-yaris-gr-gxpa16-rzcrew.jpg?v=1710314696","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1C6-311-A25\u003cbr\u003eType: Front 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - 25mm Front Anti Roll Bar - Toyota Yaris GR GXPA16 - 1C6-311-A25.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7680271417526,"title":"Cusco Japan - POWER BRACE FRONT MEMBER REAR - Toyota Yaris Cross MXPJ10","handle":"cusco-japan-power-brace-front-member-rear-toyota-yaris-cross-mxpj10-1c9-492-fmr","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1C9 492 FMR\u003cbr\u003eType: Rear 2 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - POWER BRACE FRONT MEMBER REAR - Toyota Yaris Cross MXPJ10 - 1C9 492 FMR. Picture is not the actual product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4\u003c!--split--\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4","published_at":"2023-10-10T07:40:36+08:00","created_at":"2023-10-10T07:34:31+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2020","2021","2022","2023","2024","2025","aluminum","bars-and-braces","braces","cusco-japan","cusco-japan14","JP1","MXPJ10","rear","toyota","ws120","yaris-cross-mxpj10-2020-2025-h-m15a-fxe-i4"],"price":9430,"price_min":9430,"price_max":9430,"available":true,"price_varies":false,"compare_at_price":11000,"compare_at_price_min":11000,"compare_at_price_max":11000,"compare_at_price_varies":false,"variants":[{"id":42406384599222,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C9 492 FMR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - POWER BRACE FRONT MEMBER REAR - Toyota Yaris Cross MXPJ10","public_title":null,"options":["Default Title"],"price":9430,"weight":4000,"compare_at_price":11000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-front-member-rear-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-front-member-rear-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696","options":["Title"],"media":[{"alt":"Cusco Japan - POWER BRACE FRONT MEMBER REAR - Toyota Yaris Cross MXPJ10 - 1C9 492 FMR","id":27149738049718,"position":1,"preview_image":{"aspect_ratio":1.52,"height":375,"width":570,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-front-member-rear-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696"},"aspect_ratio":1.52,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-front-member-rear-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696","width":570}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1C9 492 FMR\u003cbr\u003eType: Rear 2 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - POWER BRACE FRONT MEMBER REAR - Toyota Yaris Cross MXPJ10 - 1C9 492 FMR. Picture is not the actual product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4\u003c!--split--\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4"}

{"id":7680271384758,"title":"Cusco Japan - Front Type OS Strut Bar - Toyota Yaris Cross MXPJ10","handle":"cusco-japan-front-type-os-strut-bar-toyota-yaris-cross-mxpj10-1c6-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1C6 540 A\u003cbr\u003eType: Front 2 Points Aluminum Strut Bars\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4\u003c!--split--\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4","published_at":"2023-10-10T07:40:00+08:00","created_at":"2023-10-10T07:34:29+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2020","2021","2022","2023","2024","2025","aluminum","bars-and-braces","cusco-japan","cusco-japan14","front","JP1","MXPJ10","strut-bars","toyota","ws124","yaris-cross-mxpj10-2020-2025-h-m15a-fxe-i4"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":42406384566454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1C6 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Front Type OS Strut Bar - Toyota Yaris Cross MXPJ10","public_title":null,"options":["Default Title"],"price":12000,"weight":9000,"compare_at_price":14900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-front-type-os-strut-bar-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-front-type-os-strut-bar-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696","options":["Title"],"media":[{"alt":"Cusco Japan - Front Type OS Strut Bar - Toyota Yaris Cross MXPJ10 - 1C6 540 A","id":27149738016950,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-front-type-os-strut-bar-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-front-type-os-strut-bar-toyota-yaris-cross-mxpj10-rzcrew.jpg?v=1710314696","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1C6 540 A\u003cbr\u003eType: Front 2 Points Aluminum Strut Bars\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4\u003c!--split--\u003eYaris Cross | MXPJ10 | 2020-2025 | H | M15A-FXE | I4"}

{"id":7670520971446,"title":"Cusco Japan - Power Brace Seat Rail Plus - Toyota Corolla GR GZEA14H","handle":"cusco-japan-power-brace-seat-rail-plus-toyota-corolla-gr-gzea14h-1h1-492-sp","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-SP\u003cbr\u003eType: Center 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Seat Rail Plus - Toyota Corolla GR GZEA14H - 1H1-492-SP.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-09-19T16:42:56+08:00","created_at":"2023-09-19T16:27:53+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2020","2021","2022","2023","2024","2025","4-points","aluminum","bars-and-braces","braces","center","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","GZEA14H","JP1","toyota","ws119"],"price":16290,"price_min":16290,"price_max":16290,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":42380142346422,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1H1-492-SP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Power Brace Seat Rail Plus - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":16290,"weight":2000,"compare_at_price":18900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-seat-rail-plus-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-seat-rail-plus-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","options":["Title"],"media":[{"alt":"Cusco Japan - Power Brace Seat Rail Plus - Toyota Corolla GR GZEA14H - 1H1-492-SP","id":27149742014646,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-seat-rail-plus-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-seat-rail-plus-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-SP\u003cbr\u003eType: Center 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Seat Rail Plus - Toyota Corolla GR GZEA14H - 1H1-492-SP.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7670520938678,"title":"Cusco Japan - Power Brace Rear End - Toyota Corolla GR GZEA14H","handle":"cusco-japan-power-brace-rear-end-toyota-corolla-gr-gzea14h-1h1-492-re","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-RE\u003cbr\u003eType: Rear 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Rear End - Toyota Corolla GR GZEA14H - 1H1-492-RE.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-09-19T16:42:56+08:00","created_at":"2023-09-19T16:27:51+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2020","2021","2022","2023","2024","2025","4-points","aluminum","bars-and-braces","braces","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","GZEA14H","JP1","rear","toyota","ws120"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":14000,"compare_at_price_min":14000,"compare_at_price_max":14000,"compare_at_price_varies":false,"variants":[{"id":42380142313654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1H1-492-RE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Power Brace Rear End - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":12000,"weight":4000,"compare_at_price":14000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-rear-end-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-rear-end-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","options":["Title"],"media":[{"alt":"Cusco Japan - Power Brace Rear End - Toyota Corolla GR GZEA14H - 1H1-492-RE","id":27149741981878,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-rear-end-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-rear-end-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-RE\u003cbr\u003eType: Rear 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Rear End - Toyota Corolla GR GZEA14H - 1H1-492-RE.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7670520905910,"title":"Cusco Japan - Power Brace Floor Rear Center - Toyota Corolla GR GZEA14H","handle":"cusco-japan-power-brace-floor-rear-center-toyota-corolla-gr-gzea14h-1h1-492-r","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-R\u003cbr\u003eType: Rear 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Floor Rear Center - Toyota Corolla GR GZEA14H - 1H1-492-R.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-09-19T16:42:55+08:00","created_at":"2023-09-19T16:27:48+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2020","2021","2022","2023","2024","2025","4-points","aluminum","bars-and-braces","braces","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","GZEA14H","JP1","rear","toyota","ws119"],"price":14150,"price_min":14150,"price_max":14150,"available":true,"price_varies":false,"compare_at_price":16400,"compare_at_price_min":16400,"compare_at_price_max":16400,"compare_at_price_varies":false,"variants":[{"id":42380142280886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1H1-492-R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Power Brace Floor Rear Center - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":14150,"weight":5000,"compare_at_price":16400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-rear-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314784"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-rear-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314784","options":["Title"],"media":[{"alt":"Cusco Japan - Power Brace Floor Rear Center - Toyota Corolla GR GZEA14H - 1H1-492-R","id":27149741949110,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-rear-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314784"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-rear-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314784","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-R\u003cbr\u003eType: Rear 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Floor Rear Center - Toyota Corolla GR GZEA14H - 1H1-492-R.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7670520873142,"title":"Cusco Japan - Power Brace Floor Front Center - Toyota Corolla GR GZEA14H","handle":"cusco-japan-power-brace-floor-front-center-toyota-corolla-gr-gzea14h-1a1-492-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1A1-492-C\u003cbr\u003eType: Front 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Floor Front Center - Toyota Corolla GR GZEA14H - 1A1-492-C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2024-02-05T16:33:56+08:00","created_at":"2023-09-19T16:27:46+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2020","2021","2022","2023","2024","2025","4-points","aluminum","bars-and-braces","braces","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","front","GZEA14H","JP1","toyota","ws120"],"price":24000,"price_min":24000,"price_max":24000,"available":true,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":42380142248118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A1-492-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Power Brace Floor Front Center - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":24000,"weight":9000,"compare_at_price":27900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","options":["Title"],"media":[{"alt":"Cusco Japan - Power Brace Floor Front Center - Toyota Corolla GR GZEA14H - 1A1-492-C","id":27149741916342,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-center-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1A1-492-C\u003cbr\u003eType: Front 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Floor Front Center - Toyota Corolla GR GZEA14H - 1A1-492-C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7670520840374,"title":"Cusco Japan - Power Brace Floor Front Side - Toyota Corolla GR GZEA14H","handle":"cusco-japan-power-brace-floor-front-side-toyota-corolla-gr-gzea14h-1h1-492-f","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-F\u003cbr\u003eType: Front 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Floor Front Side - Toyota Corolla GR GZEA14H - 1H1-492-F.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-09-19T16:42:56+08:00","created_at":"2023-09-19T16:27:43+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2020","2021","2022","2023","2024","2025","4-points","aluminum","bars-and-braces","braces","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","front","GZEA14H","JP1","toyota","ws119"],"price":22290,"price_min":22290,"price_max":22290,"available":true,"price_varies":false,"compare_at_price":25900,"compare_at_price_min":25900,"compare_at_price_max":25900,"compare_at_price_varies":false,"variants":[{"id":42380142215350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1H1-492-F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Power Brace Floor Front Side - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":22290,"weight":6000,"compare_at_price":25900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-side-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-side-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","options":["Title"],"media":[{"alt":"Cusco Japan - Power Brace Floor Front Side - Toyota Corolla GR GZEA14H - 1H1-492-F","id":27149741883574,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-side-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-power-brace-floor-front-side-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314783","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-492-F\u003cbr\u003eType: Front 4 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - Power Brace Floor Front Side - Toyota Corolla GR GZEA14H - 1H1-492-F.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7670520774838,"title":"Cusco Japan - 26mm Rear Anti Roll Bar - Toyota Corolla GR GZEA14H","handle":"cusco-japan-26mm-rear-anti-roll-bar-toyota-corolla-gr-gzea14h-1h1-311-b26","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-311-B26\u003cbr\u003eType: Rear 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - 26mm Rear Anti Roll Bar - Toyota Corolla GR GZEA14H - 1H1-311-B26.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-09-19T16:42:11+08:00","created_at":"2023-09-19T16:27:38+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2020","2021","2022","2023","2024","2025","anti-roll-bars","bars-and-braces","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","GZEA14H","JP1","rear","steel","toyota","ws124"],"price":26400,"price_min":26400,"price_max":26400,"available":true,"price_varies":false,"compare_at_price":32900,"compare_at_price_min":32900,"compare_at_price_max":32900,"compare_at_price_varies":false,"variants":[{"id":42380142149814,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1H1-311-B26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - 26mm Rear Anti Roll Bar - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":26400,"weight":9000,"compare_at_price":32900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-26mm-rear-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-26mm-rear-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785","options":["Title"],"media":[{"alt":"Cusco Japan - 26mm Rear Anti Roll Bar - Toyota Corolla GR GZEA14H - 1H1-311-B26","id":27149741555894,"position":1,"preview_image":{"aspect_ratio":1.501,"height":1066,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-26mm-rear-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785"},"aspect_ratio":1.501,"height":1066,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-26mm-rear-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-311-B26\u003cbr\u003eType: Rear 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - 26mm Rear Anti Roll Bar - Toyota Corolla GR GZEA14H - 1H1-311-B26.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}

{"id":7670520742070,"title":"Cusco Japan - 28mm Front Anti Roll Bar - Toyota Corolla GR GZEA14H","handle":"cusco-japan-28mm-front-anti-roll-bar-toyota-corolla-gr-gzea14h-1h1-311-a28","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-311-A28\u003cbr\u003eType: Front 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - 28mm Front Anti Roll Bar - Toyota Corolla GR GZEA14H - 1H1-311-A28.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3","published_at":"2023-09-19T16:42:00+08:00","created_at":"2023-09-19T16:27:36+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2020","2021","2022","2023","2024","2025","anti-roll-bars","bars-and-braces","corolla-gr-gzea14h-2020-2025-tc-g16e-gts-i3","cusco-japan","cusco-japan14","front","GZEA14H","JP1","steel","toyota","ws124"],"price":26400,"price_min":26400,"price_max":26400,"available":true,"price_varies":false,"compare_at_price":32900,"compare_at_price_min":32900,"compare_at_price_max":32900,"compare_at_price_varies":false,"variants":[{"id":42380142117046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1H1-311-A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - 28mm Front Anti Roll Bar - Toyota Corolla GR GZEA14H","public_title":null,"options":["Default Title"],"price":26400,"weight":9000,"compare_at_price":32900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-28mm-front-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-28mm-front-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785","options":["Title"],"media":[{"alt":"Cusco Japan - 28mm Front Anti Roll Bar - Toyota Corolla GR GZEA14H - 1H1-311-A28","id":27149741523126,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-28mm-front-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-japan-28mm-front-anti-roll-bar-toyota-corolla-gr-gzea14h-rzcrew.jpg?v=1710314785","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 1H1-311-A28\u003cbr\u003eType: Front 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eIncrease your chassis Stability and rigidity with this Cusco Japan - 28mm Front Anti Roll Bar - Toyota Corolla GR GZEA14H - 1H1-311-A28.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003eCorolla GR | GZEA14H | 2020-2025 | TC | G16E-GTS | I3"}